RAD 10"

Speaker Type: Acoustic suspension
Driver: 10" epoxy treated paper/kevlar pulp cone, patented XBL^{2 TM} motor technology for low distortion at high excursion (over 1" linear peak to peak displacement)
Frequency response: 30Hz-160Hz anechoic + 3dB (-3dB at 22Hz in-room)
Amplifier: 150W RMS into 4 ohms, 12dB/octave electronic crossover continuously variable from 40Hz to 160Hz, high and low level inputs, 0-180 degree phase switch, volume control, auto on/off switch
Dimensions: 14"H x 14"W x 14"D
Weight: 50 lbs.
Other features: chrome spikes
Price: $600 (Fully assembled and tested)
Additional options: This sub can be purchased as a kit. See below for DIY Pricing:
DIY kit-unfinished cabinet: $425;
Black textured finish: $450;
Veneered* in standard choices: $525 (*Call for standard veneer choices)
(Custom cabinets are available, front firing sealed enclosure shown.)

RAD 12"

Speaker Type: Acoustic suspension
Driver: 12" epoxy treated paper/kevlar pulp cone, patented XBL^{2 TM} motor technology for low distortion at high excursion (over 2" linear peak to peak displacement)
Frequency response: 25Hz-160Hz anechoic + 3dB (-3dB at 20Hz in-room)
Amplifier: 380W RMS into 4 ohms, 12dB/octave electronic crossover continuously variable from 40Hz to 160Hz, high and low level inputs, 0-180 degree phase switch, volume control, auto on/off switch, extension filter with adustable frequency and damping control
Dimensions: 16"H x 16"W x 16"D
Weight: 80 lbs.
Other features: Chrome spikes
Price: $1000
(Custom cabinets are available, front firing sealed enclosure shown.)

RAD 15"

Speaker Type: Acoustic suspension
Driver: 15" epoxy treated paper/kevlar pulp cone, patented XBL^{2 TM} motor technology for low distortion at high excursion (over 2.5" linear peak to peak displacement)
Frequency response: 25Hz-150Hz anechoic + 3dB (-3dB at 20Hz in-room)
Amplifier: 720W RMS into 4 ohms, 50 Hz to 150 Hz, Linkwitz Riley 4th order Independently adjustable for high pass and subwoofer output, 0-180 degree phase switch, volume control, auto on/off switch, Quasi-parametric EQ, center sweepable from 20 Hz to 50 Hz, gain variable 0 to 6 dB, fixed bandwidth (1/2 octave)
Dimensions: 18"H x 18"W x 18"D
Weight: 140 lbs.
Other features: Chrome spikes
Price: $1500 (for standard enclosure)
(Custom cabinets are available. For down firing sealed end table enclosure shown, add $200)